Do you launch a bat when you try to open and close your garage door? Will your loud, squeaky, and curious garage door disturb your neighborhood? It will be annoying for you too.
It will be a big hassle for you and your neighbors. It is very annoying early in the morning and in the middle of the night. The best way to avoid the problems of a noisy garage door is to do a garage door maintenance. Homeowners might neglect until it’s too late. If you don’t want to disturb your neighborhood then you need to fix the problem the first time you notice it. You can consult them best garage door repair in Carmel, Indiana near you to fix your loud screeching garage door. Fortunately, it is simple and easy to fix that noisy garage door using simple tips that you can do yourself. Everything you need to collect the simple things to get started is listed below:
- A good quality lubricant spray or grease
- WD-40 or silicone spray
- A cotton cloth
- A wooden ladder
Always be careful when standing on a ladder to gain access to possible spots. You should check all moving parts of your garage door to see any build-up of dirt and debris on the metal rails and rollers. These substances can cause friction when the garage door moves. The friction between the dry rollers and the dirty webs can lead to loud noises.
Apply a grease or silicone spray to the rails. Cover it properly to remove the friction. If you don’t have grease, you can use silicone spray to lubricate the rails. The use of WD-40 is not recommended here as it will attract dirt and debris and create obstacles. Since these parts have to be oiled, the use of the silicone spray is sufficient.
Keep opening and closing the garage door to ensure proper lubrication of moving parts and to evenly distribute grease and oil. Wipe the excess oil off the rails with a cotton cloth and Garage door rollers. This will ensure that excess oil does not fall on the floor of your garage, on your vehicle, or on any other item stored in your garage.
Apply the silicone spray to chains, cables and springs to lubricate them. The chain is near the engine, which should be fully exposed. The springs are in the center of the garage door, just above the opening near the motor. All of these moving parts require regular lubrication. Now your garage door shouldn’t be noisy at all. It should open and close smoothly and with a minimal level of noise.
You might like it too …
Comments are closed.