Alessandro DeMarinis of New York is a contractor with plumbing, HVAC, and fire restoration experience. In the article below, Alessandro DeMarinis discusses plumbing issues in new home construction, and how to avoid current and future plumbing issues in your new build.
Moving into a new home is always an exciting feeling and most new homeowners expect their property to be in perfect condition. Unfortunately, though, there are normally a few kinks to work out before everything is good to go. For example, the plumbing in a new build is often prone to specific problems that can’t be identified until someone moves into the property explains Alessandro DeMarinis.
From leaky pipes to clogged drains, even a new home may have plumbing issues. Therefore, be sure to inspect certain parts of your new build’s plumbing system before settling in. By taking careful steps to check the following systems, you can ensure that your family is comfortable and safe from sudden burst pipes or freezing cold showers explains Alessandro DeMarinis.
Check for leaky pipes and loose gaskets
Even the best construction teams can miss a pipe or two when they’re working on a new build. Unfortunately, though, a loose pipe or gasket can cause serious problems down the road. For example, a gasket that isn’t properly sealed can slowly leak water into your walls, which can cause mold growth and structural damage.
Alessandro DeMarinis says that if you notice water spots on your ceilings or walls, have a professional plumber come out to inspect your pipes. They will be able to determine whether or not you have a leak and can help to repair it before it causes any further damage. Additionally, be sure to keep an eye out for any puddles around your home, as these could be indicative of a larger problem.
Inspect Your Water Heater
Your water heater is one of the most important parts of your home’s plumbing system, so it’s important to make sure that it’s in good working condition. Alessandro DeMarinis says to start by checking the anode rod, which is responsible for preventing corrosion. If the anode rod is corroded, it could be a sign that your water heater isn’t working as efficiently as it should be.
You should also check the temperature and pressure relief valve to make sure that it’s working properly. This valve is designed to release water if the temperature or pressure inside your water heater gets too high. If it’s not working properly, it could cause your water heater to explode explains Alessandro DeMarinis of Yonkers. If you find any problems, contact a heating specialist immediately to fix the issue.
Check Your Toilets
Alessandro DeMarinis explains that your toilets are another important part of your plumbing system, so it’s important to make sure that they’re in good working condition. Start by flushing each toilet to see if it flushes properly. If it doesn’t, there could be a clog in the line.
Next, check the toilets for any leaks. To do this, put a few drops of food coloring in the toilet tank and wait a few minutes. If the color appears in the bowl, it means that there’s a leak. Lastly, check the toilet seats to make sure that they’re securely attached. If they’re not, they could come loose and cause someone to fall says Alessandro DeMarinis.
Inspect Your Sump Pump
If your home has a sump pump, it’s important to make sure that it’s in good working condition. Start by checking the float switch to make sure that it’s not stuck. If it is, it could cause your sump pump to run continuously, which could lead to premature wear and tear.
Next, Alessandro DeMarinis says you should check the discharge pipe to make sure that it’s not frozen. If it is, it could cause your sump pump to overflow. Lastly, check the sump pit to make sure that it’s free of debris. If it’s not, it could cause your sump pump to clog.
Check Your Drains
It’s not uncommon for new drains to become clogged with dust and debris after sitting unused for several months, explains Alessandro DeMarinis. Start by running water down each drain to see if it drains properly. If it doesn’t, there could be a clog in the line. You can purchase a commercial drain cleaner from most grocery stores and let it sit for 30 minutes to clear the blockage.
If this does not work, you can also purchase a snake to clear out the system. If nothing works, you should contact a professional plumber to inspect the drain, as there could be a mechanical problem rather than a blockage.
Alessandro DeMarinis says don’t be fooled into thinking that your new home’s plumbing system will work perfectly from the first day. Always take time to inspect your pipes, drains, heater, and sump pump to prevent expensive and widespread damage later down the line. If you can catch the issue early, the builders may even fix the system free of charge.